SENS-O2-485
The SENS-O2-485 is a high-quality air quality sensor that measures oxygen level to provide signal output for monitoring or control. Oxygen level is an important indication of indoor air quality as it may cause chronic...
CO Sensor RS485
Reference:
SENS-CO-485
The SENS-CO-485 is specially designed for monitoring carbon monoxide concentration to prevent poor ventilation. In addition, it provides different signal output options and one relay output for monitoring, analysing and alarm. When it is deployed with ventilation system, it can efficiently control and ameliorate air quality.
Leadtime Time: 2- 4weeks
- Widely used in underground parking, garage or basement to prevent high concentration of CO
- Used to trigger alarm or activate ventilation system to introduce fresh air
SENS-CO-485
Data sheet
- Dimensions
- 113.57 x 80 x 28.79mm
- Accuracy
- ±5% for 0 to 100ppm, ±10% for 100 to 250ppm
- Power Supply
- 12 to 36V AC/DC, AC 24V (50/60Hz)
- Measurement Range
- 0~250ppm
- Signal Output
- RS-485 Modbus RTU
- Environmental
- Temperature: -10 to +50℃ Humidity: 15 to 90%RH
- Certifications
- CE and FCC
- Alarm output
- Relay output N.O,N.C (2A / 30V DC)
Related Products
SENS-PM10-485
The SENS-PM10-485 is a high-quality sensor that can accurately measure atmospheric particulate matter (PM) for diameters less than 10micrometres for indoor air quality monitoring purpose. These cost effective and...
SENS-MOTION-01
The SENS-MOTION-01 is a highly sensitive sensor that uses dual technology – Passive Infrared (PIR) and microwave for accurate detection of people presence within the vicinity. The PIR technology senses heat and...
SENS-PM2.5-485
The SENS-PM2.5-485 is a high-quality sensor that can accurately measure atmospheric particulate matter (PM) for diameters less than 2.5micrometres for indoor air quality monitoring purpose. These cost effective and...
SENS-HCHO-485
SENS-HCHO-485 are high-quality air quality sensors that measure the concentration of several different gases or hazardous substance in air. SENS-HCHO-485 measures formaldehyde (HCHO), a colourless, poisonous, highly...
SENS-THCO2-485
The SENS-THCO2-485 is a high-quality air quality sensor, designed to measure the ambient carbon dioxide concentration, temperature and humidity for monitoring or control purpose. It uses nondispersive infrared (NDIR)...
SENS-CO2-485
The SENS-CO2-485 is a high-quality air quality sensor, designed to measure the ambient carbon dioxide concentration. It uses nondispersive infrared (NDIR) sensing element to ensure the accuracy of measurement. The...
SENS-TH-485
The SENS-TH-485 is a highly sensitive and stable sensor used to measure temperature and humidity with rapid response time and great accuracy. With options for wired or wireless (SENS-TH-LORA) deployments, this sensor...
SENS-TVOC-485
SENS-TVOC-485 are high-quality air quality sensors that measure the concentration of several different gases or hazardous substance in air. Total volatile organic compounds (TVOCs) which are measured by SENS-TVOC-485,...
SENS-NOISE-485
The SENS-NOISE-485 is a highly sensitive sensor that measures sound level continuously in the area in which it is located. It uses digital detection technology and a digital signal processing chip to measure sound...